Portable vehicle-mounted satellite positioning terminal for battery vehicles, motorcycles, and engineering vehicles

Based on the latest international chip-level architecture products, industrial-grade communication modules and positioning modules GPRS, SMS dual-channel, TCP and UDP dual-mode work;
? Built-in flat panel active positioning antenna and GSM FPC antenna to prevent external damage to the antenna;
? Satellite reflected wave positioning, base station assisted positioning, strong anti-blocking ability, reducing blind spots;
? The product's three-proof design, and the engineering plastic shell is splash-proof and dust-proof design;
? Low power consumption, power saving mode <15mA, built-in large-capacity backup battery;
? The working power supply voltage is up to 60V, which is more suitable for vehicles with poor working conditions in China;
? Exquisite structure, very simple to install, just connect to the power supply;
? The terminal can be upgraded remotely and maintenance is simple.
? Signal detection and control (6 signal sensors, 8 vehicle state detection, intelligent and forced fuel and electricity control.)

   6 signal sensors: emergency button, ignition input, custom positive 1 input, low battery detection, mainframe power failure by backup battery, battery removal detection.
   8 vehicle status detections: ignition, self-defined positive 1 input, fuel and electricity, guards, low battery detection, mainframe power failure by backup battery, battery removal detection, vehicle speeding.
  Intelligent and forced oil and electricity control: According to the vehicle ignition state and driving speed state, the vehicle implements controllable oil circuit control.
? Vehicle alarm function (17 types of alarms, 3 types of alarms.)

  17 types of alarms: emergency alarm, guard alarm, battery removal alarm, low battery alarm, no entry and cross-border alarm, no-go cross-border alarm, road detection deviation alarm, road detection overspeed alarm, road detection passing time limit alarm, road The detection passes the time lower limit alarm, overspeed alarm, low speed alarm, fatigue driving alarm, satellite signal receiver failure alarm, and self-defined positive 1 input to trigger the alarm.
      3 kinds of alarm methods (related to communication protocol): management center SMS alarm, GPRS alarm, mobile phone self-service alarm.
? Vehicle monitoring function
     Vehicle automatic monitoring and positioning function, 108 area settings, electronic fence function, satellite positioning mileage statistics, blind spot reporting function, trajectory storage function, base station auxiliary positioning function.
? Road detection function

(1) 8 road detection data, road detection calculation, road detection deviation alarm, road detection speeding alarm, entry/exit
 Station report, pass time upper/lower limit alarm, and station related control.

(2) The terminal supports 8 different road information data detection functions at the same time. Line attributes include: overspeed threshold, yaw lane
 The width of the road, and the detection of inbound and outbound stations on the related line.
? Multi-center, multi-channel

      Support dual IP connection, can send information to 2 different management center IP, SMS main and auxiliary dual monitoring center number (related to communication protocol). GPRS/SMS (command, data) are parallel at the same time, and the terminal supports both TCP and UDP methods.
? Communication flow control
      Short message compression transmission, a short message with 3 GPS information. GPRS compressed transmission to save traffic, and 10 GPS information can be packaged and transmitted. GPRS priority transmission, SMS silence function, zero SMS fee for vehicle terminal.
? Remote function

      Rich command set, various functions can be turned on/off through commands, various parameters can be set in the air, the host program supports remote download, users can complete the program update without going to the scene when updating online, which improves efficiency and saves time .
? Protective function

(1) Power saving mode: After the vehicle is turned off, the working current of the terminal power saving mode is reduced to 15mA@12V.
 (2) Battery over-discharge protection function: when the battery voltage is too low (10.5V), switch to backup power supply.
 (3) Overvoltage protection: If the limit voltage (60V) is exceeded, the external circuit protection terminal will be cut off immediately.